I have AR2413 cardbus device (D-Link DWL-G630):
ath0 at cardbus0 dev 0 function 0 “Atheros Communications, Inc., AR5001-0000-0000, Wireless LAN Reference Card”: irq 10
ath0: AR2413 7.8 phy 4.5 rf 5.6, FCC2A*, address 00:13:46:6e:a4:ef
The ath interface:
# ifconfig ath0 up
# ifconfig ath0
ath0: flags=8863 mtu 1500
lladdr 00:13:46:6e:a4:ef
media: IEEE802.11 autoselect (DS1 mode 11b)
status: no network
ieee80211: nwid default chan 4 bssid 00:13:46:7c:56:b5 23%
inet6 fe80::213:46ff:fe6e:a4ef%ath0 prefixlen 64 scopeid 0x6
I can see 802.11b frames, and the cat get replies to probe requests, but association doesn’t work:
15:57:59.073693 0:13:46:6e:a4:ef > ff:ff:ff:ff:ff:ff, bssid ff:ff:ff:ff:ff:ff: 802.11: probe request, <radiotap v0, SHORTPRE, chan 4, 11b, txpower 30dBm>
15:58:02.744340 0:13:46:7c:56:b5 > 0:c:f1:62:2:a8, bssid 0:13:46:7c:56:b5: 802.11: probe response, ssid (default), rates, ds, country 71 66 32 1 13 14, erp, <radiotap v0, chan 4, 11b, rssi 18/64>
15:58:02.753001 0:13:46:7c:56:b5 > ff:ff:ff:ff:ff:ff, bssid 0:13:46:7c:56:b5: 802.11: beacon, ssid (default), rates, ds, tim, country 71 66 32 1 13 14, erp, xrates, <radiotap v0, chan 4, 11b, rssi 17/64>
